Cradle Leds; Cradle Pwr Led; B1 And B2 Led - Honeywell HX3 Reference Manual

Cradle LEDs

Cradle PWR LED

When PWR LED is ...
Off
Green

B1 and B2 LED

When B1 and/or B2 LED is ...
Off
Green
Red
Amber
Flashing Red
2-10
It means ....
No AC/DC power supplied to the cradle
and/or
No HX3 in the charging bay
and/or
HX3 is not properly seated in charging bay
and/or
if this is the first time the HX3 has been inserted, the HX3 is properly seated and has not
been powered On.
HX3 is On, is properly seated in the charging bay and is receiving external power through
the cradle.
No battery
or no AC power
Charged
Charging
Standby
Fault
It means ....
No spare battery in the battery bay(s)
or no AC/DC power is being applied to the cradle.
Spare battery pack fully charged.
Spare battery pack charging.
Spare battery pack temperature out of range.
Spare battery pack fault or failure.
1. B1 LED
2. PWR LED
3. B2 LED