Network With Sim Card - Honeywell Marathon Reference Manual

Network with SIM Card

Select Connection
Label
Select automatically
Use GPRS/EDGE only
Use UMTS/HSPA only
Select and tap Apply. A "Network changed successfully" message is displayed.
Close the tab and view the signal strength icon in the main window. Once the signal strength is displayed, you can establish a
connection.
Select Network
Use this option to select from available networks.
Note: When you are registered to a CDMA network, you cannot select the network. "All CDMA network" is shown instead.
Note: The network list only appears if the connection setting is Only use GPRS or Only use UMTS/HSPA.
Selects the best suited network automatically
Use only GPRS/EDGE for a connection
Use only UMTS/HSPA for a connection.
Description
4-69