Install A Sim Card - Honeywell Marathon Reference Manual

Install a SIM Card

Note: Honeywell recommends that installation or removal of accessories be performed on a clean, well-lit surface. Protect
the work surface, the Marathon, and components from electrostatic discharge. Contact
assistance when installing or removing a SIM card.
Turn the Marathon off.
Place the Marathon face down on a stable surface.
1. Remove the 4 mounting screws securing the battery cover to the Marathon and remove the battery cover. Put the
screws aside in a safe place.
2. Lift the battery using the pull strap and move it aside. Do not disconnect the battery.
3. Push the SIM card holder up (in the direction of the word OPEN on the holder) to release the lock.
4. Carefully lift the SIM card holder up. Do not remove the SIM card holder.
5. Slide a SIM card into the slot using the guides on the inside of the slot. Do not remove the SIM card holder.
6. The angled corner of the SIM card ensures that the card fits the correct way in the slot.
7. Lower the holder, containing the SIM card, into the opening.
8. Slide the SIM card holder down (in the direction of the word LOCK on the holder) to lock the SIM card flat in the opening
(LOCK).
9. Replace the battery in the battery well.
10. Replace the battery cover, securing it with the original 4 screws.
Technical Assistance for
5-3