Oneclick Internet; Preparing For Initial Use On The Marathon; Install Sim Card; Load Firmware - Honeywell Marathon Reference Manual

OneClick Internet

This section contains the User Manual for the customized version of WebToGo's OneClick Internet for the Honeywell
Marathon.
OneClick Internet is installed by Honeywell on all Marathons equipped with a WWAN radio. Available carriers and OneClick
features may vary by device.
OneClick Internet provides:
Internet connection management
l
Email download
l
SMS Management
l
Contact management for SIM and Microsoft Outlook
l
GPS Management
l
Since WebToGo OneClick Internet is preinstalled, it is present on the Windows Start Menu. A desktop icon is also provided.
Honeywell does not recommend using standby on the Marathon while the WWAN connection is active. When
exiting standby, a delay of one minute or more may occur as the WWAN radio reads firmware files and initializes
before reconnecting. If this delay is acceptable to the user, standby may be enabled.

Preparing for Initial Use on the Marathon

Install SIM Card

If using a CDMA carrier such as Verizon, skip this step because a SIM card is not used.
Install a SIM card in the Marathon.

Load Firmware

While the OneClick Internet utility is preinstalled, it is necessary to load the GOBI radio firmware for your selected carrier such
as AT&T, T-Mobile or Verizon.
Note: For carriers requiring a SIM card, the firmware may automatically be selected when a SIM card is installed in the
Marathon.
Doubletap the OneClick Internet icon on the Marathon desktop.
Tap the Settings button and select the Firmware tab. Select the firmware for your carrier from the list and tap Change.
For more details, see OneClick Internet Connection Manager

Activation

This step is only necessary for Verizon.
You need the IMEI number for the Marathon when you contact Verizon prior to activating service on the Marathon. The IMEI
number can be found on the
4-62
Settings > Info tab.
and the Firmware tab.