Seats, Front - Volvo V40 Cross Country Owner's Manual

Choosing key position/level
•
Key position 0 - Unlock the car - This
means that the car's electrical system is
at level 0.
•
Key position I - With the remote control
key fully inserted into the ignition switch
- Briefly press START/STOP ENGINE.
NOTE
To reach level I or II without starting the
engine - do not depress the brake/clutch
pedal when these key positions are due to
be selected.
•
Key position II - With the remote control
key fully inserted into the ignition switch
- Give a long 16 press on START/STOP
ENGINE.
•
Back to key position 0 - To return to key
position 0 from position II and I - Briefly
press on START/STOP ENGINE.
Audio system
For information on audio system functions
with remote control key removed, see the
Sensus Infotainment supplement.
Starting and stopping the engine
For information about starting/switching off
the engine, see Starting the engine (p. 266).
15 Not necessary for cars with the Keyless* function.
16 Approx. 2 seconds.
Also applies to electrically operated seat.
17
Towing
For important information about the remote
control key during towing, see Towing
(p. 310).
Related information
15
•
Key positions (p. 75)
15
03 Instruments and controls

Seats, front

The car's front seats have different setting
options for optimum seating comfort.
To adjust lumbar support*, turn the
wheel 17 .
Forward/backward: lift the handle to
adjust the distance to the steering wheel
and pedals. Check that the seat is locked
after adjusting position.
To raise/lower the front edge of seat
cushion*, pump up/down.
Adjust backrest rake, turn the wheel.
Raise/lower the seat*, pump up/down.
Control panel for power seat*, see Seats,
front - electrically operated (p. 79).
*
Option/accessory, for more information, see Introduction.
03
}}
77