Cruise Control* - Resume Set Speed - Volvo V40 Cross Country Owner's Manual

07 Driver support
||
> The combined instrument panel's
marking (5) and symbol (6) change colour
from WHITE to GREY - Cruise control is
temporarily disengaged.
Standby mode due to driver intervention
Cruise control is temporarily disengaged and
set automatically in standby mode if:
•
the foot brake is used
•
the clutch pedal is depressed
•
the gear lever/selector is moved to N
position
•
the driver maintains speed higher than
the stored speed for longer than
1 minute.
The driver must then regulate the speed.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
stored speed when the accelerator pedal is
released.
Automatic standby mode
Cruise control is temporarily disengaged and
set in standby mode if:
07
•
wheels lose traction
•
engine speed is too low/high
•
speed falls below approx. 30 km/h.
The driver must then regulate the speed.
6 A Volvo dealer has updated information about what applies in each respective market.
A Volvo dealer has updated information about what applies in each respective market.
7
*
196
Option/accessory, for more information, see Introduction.
Related information
•
Cruise control* (p. 193)
•
Cruise control* - managing speed (p. 194)
•

Cruise control* - resume set speed

(p. 196)
•
Cruise control* - deactivate (p. 197)
Cruise control* - resume set speed
The cruise control (p. 193) (CC – Cruise
Control) helps the driver to maintain an even
speed.
After temporary deactivation and standby
mode (p. 195) it is possible to resume the set
speed.
The steering wheel buttons and display in cars
without speed limiter 7
.