08 Starting and driving
Start/Stop* - the engine does not
auto-start
The engine does not always auto-start after
having auto-stopped.
In the following cases the engine does not
auto-start after having auto-stopped:
Conditions
A gear is engaged without
declutching - a display text
prompts the driver to set the gear
lever in neutral position in order to
enable automatic starting.
The driver is unrestrained, the gear
selector is in P position and the
driver's door is open - a normal
engine start must take place.
A
M = Manual gearbox, A = Automatic gearbox.
Related information
•
Start/Stop* (p. 277)
•
Start/Stop* - function and operation
(p. 278)
•
Starting the engine (p. 266)
•
Start/Stop* - settings (p. 283)
•
Start/Stop* - the engine auto-starts
08
(p. 281)
•
Start/Stop* - the engine does not stop
(p. 279)
*
282
Option/accessory, for more information, see Introduction.
•
Start/Stop* - involuntary stop manual
gearbox (p. 282)
•
Start/Stop* - symbols and messages
(p. 284)
•
Battery - Start/Stop (p. 374)
M/
A
A
M
A
Start/Stop* - involuntary stop manual
gearbox
In the event that a start-up fails and the
engine stops, proceed in accordance with the
below:
1. Depress the clutch pedal again - the
engine starts automatically.
2. In certain cases the gear lever must be
set in neutral position. The combined
instrument panel then shows the text
gear in neutral
.
Related information
•
Start/Stop* (p. 277)
•
Start/Stop* - function and operation
(p. 278)
•
Starting the engine (p. 266)
•
Start/Stop* - settings (p. 283)
•
Start/Stop* - the engine does not auto-
start (p. 282)
•
Start/Stop* - the engine auto-starts
(p. 281)
•
Start/Stop* - the engine does not stop
(p. 279)
•
Start/Stop* - symbols and messages
(p. 284)
•
Battery - Start/Stop (p. 374)
Put