Key Positions - Functions At Different Levels - Volvo V40 Cross Country Owner's Manual

03 Instruments and controls
||
Insert the key
1. Hold the end of the remote control key
with the detachable key blade and insert
the key in the ignition switch.
2. Then press the key in the lock up to its
end position.
IMPORTANT
03
Foreign objects in the ignition switch can
impair the function or destroy the lock.
Do not press in the remote control key
incorrectly turned - Hold the end with the
detachable key blade; see Detachable key
blade - detaching/attaching (p. 164).
Withdraw the key
Push the remote control key, allow it to eject,
then pull it out from the ignition switch.
76
Key positions - functions at different
levels
In order to enable the use of a limited number
of functions with the engine switched off, the
car's electrical system can be set in 3 differ-
ent levels (key positions) - 0, I and II - with the
remote control key. Throughout this owner's
manual these levels are described using the
denomination "key positions".
The following table shows the functions avail-
able in each key position/level.
Level Functions
0 Odometer, clock and temperature
gauge are illuminated.
Power seats can be adjusted.
The audio system can be used for
a limited time - see the Sensus
Infotainment supplement.
I
Sun visor for glass roof, power
windows, 12 V socket in the pas-
senger compartment, RTI, phone,
ventilation fan and windscreen
wipers can be used.
II
The headlamps come on.
Warning/indicator lamps illumi-
nate for 5 seconds.
Several other systems are acti-
vated. However, heating in seat
cushions and the rear window can
only be activated after the engine
has been started.
This key position consumes a
lot of current from the starter
battery and should therefore be
avoided!