Coolant - Level - Volvo V40 Cross Country Owner's Manual

Measuring the oil level, 5-cyl. diesel
If the oil level needs to be checked then it
should be carried out in accordance with the
sequence below.
1. Activate key position II; see Key positions
- functions at different levels (p. 76).
2. Rotate the thumbwheel on the left-hand
Oil level
stalk switch to position
> You will then see information displayed
about the engine oil level.
For more information on menu naviga-
tion, see Menu navigation - combined
instrument panel (p. 105).
The figures 1-4 represent filling level. Do not fill
more oil if filling level (3) or (4) is shown. The rec-
ommended filling level is 4. Message and graph
in the display. The left-hand display shows the
digital combined instrument panel and the right-
hand the analogue.
Related information
•
Engine oil - general (p. 355)
•
Key positions - functions at different lev-
els (p. 76)
.
10 Maintenance and service

Coolant - level

The coolant cools the internal combustion
engine to the correct operating temperature.
The heat that is transferred from the engine to
the coolant can be used to heat the passen-
ger compartment.
The coolant level must lie between the MIN
and MAX marks on the expansion tank.
Checking the level and topping up
When topping up the coolant, follow the
instructions on the packaging. It is important
that the mixture of coolant concentrate and
water is correct for the prevailing weather
conditions. Never top up with water only. The
risk of freezing increases with both too little
and too much coolant concentrate.
10
}}
359