Saving Settings; Power* Front Seats; Multi-Function Control - Volvo XC60 Twin Engine Quick Manual

Table of Contents

Use the controls on the outside of the seats to adjust the seat position,

lumbar support*, etc. One control is shaped like a seat so you can more

easily understand how you change position, the other one, the multi-

function control*, is used for adjusting lumbar support, massage*, etc.

The seat-shaped control

Adjust the seat cushion or move the whole seat using the lower control.

Adjust the angle of the backrest using the rear control.

Settings for massage*, side support*, lumbar support* and seat cushion

extension are linked to the multi-function control.

1. Activate seat setting in the centre display by turning the control.

2. Select the desired function in the centre display by turning the con-

trol.

3. Change the setting by pressing in the upper/lower/front/rear part of

the control.

Saving settings

1. Set the seat, door mirrors and head-up display* to the desired posi-

tion and press the M button on the door panel. The light indicator in

the button illuminates.

2. Within 3 seconds, press the memory button 1 or 2. An acoustic sig-

nal sounds and the light indicator in the M button extinguishes.

To use your saved seat settings:

With the door open - push and release one of the memory buttons.

With the door closed - hold one of the memory buttons pressed in until

the stored position is reached.

Table of Contents