Power* Front Seats; Multi-Function Control - Volvo V90 CROSS COUNTRY Quick Manual

02

POWER* FRONT SEATS

Use the controls on the outer side of the seat to adjust e.g. the seat
position and lumbar support*. The two controls shaped like a seat are
used to adjust the position of the seat. The third, multifunction control*
is used to adjust the various comfort functions, e.g. massage*.
The seat-shaped controls
Adjust the seat cushion or move the whole seat using the lower control.
Adjust the angle of the backrest using the rear control.

Multi-function control

Settings for massage*, side support*, lumbar support* and seat cushion
extension* are linked to the multi-function control.
1. Activate seat setting in the centre display by turning the control up/
down.
2
2. Toggle between the different functions in the centre display by turn-
ing the control up/down.
3. Change the setting of the selected function by pressing in the
upper/lower/front/rear part of the control.
Store positions
1. Set the seat, door mirrors and head-up display* to the desired posi-
tion and press the M button on the door panel. The light indicator in
the button illuminates.
2. Within 3 seconds, press the memory button 1 or 2. An acoustic sig-
nal sounds and the light indicator in the M button extinguishes.
To use your stored position:
With the door open - push and release one of the memory buttons.
With the door closed - hold one of the memory buttons pressed in until
the stored position is reached.
2 On cars with four-way lumbar support*