Table of Contents
Advertisement
02
POWER* FRONT SEATS
Use the controls on the outer side of the seat to adjust e.g. the seat
position and lumbar support*. The two controls shaped like a seat
are used to adjust the position of the seat. The third, four-way con-
trol* is used to adjust the lumbar support.
The seat-shaped controls
Adjust the seat cushion or move the whole seat using the lower
control. Adjust the angle of the backrest using the rear control.
Four-way control*
Adjust the lumbar support* by pressing the four-way control.
Press up or down to move the lumbar support upward or down-
–
ward.
Press the front or rear part of the four-way control to increase or
–
decrease the lumbar support.
Store positions
1. Set the seat and door mirrors to the desired position and press
the M button on the door panel. The light indicator in the button
illuminates.
2. Within 3 seconds, press the memory button 1 or 2. An acoustic
signal sounds and the light indicator in the M button extin-
guishes.
To use your stored position:
With the door open - push and release one of the memory buttons.
With the door closed - hold one of the memory buttons pressed in
until the stored position is reached.
Advertisement
Table of Contents
