Light Switches - Volvo V40 Cross Country Owner's Manual

Light switches

The headlamp control activates and adjusts
the external lighting. It is also used to adjust
display and instrument lighting and mood
lighting (p. 92).
Overview, light switches
Overview, light switches.
Thumbwheel for adjusting display and
instrument lighting and ambient lighting*
Button for rear fog lamp
Knob for daytime running lights and park-
ing lamps
Thumbwheel 19 for headlamp levelling
Not available for cars equipped with active Xenon headlamps*.
19
Knob positions
Posi- Specification
tion
Daytime running lights
the car's electrical system is in
key position II or the engine is
running.
Main beam flash can be used.
Daytime running lights, side
marker lamps rear and position/
parking lamps when the car's
electrical system is in key posi-
tion II or the engine is running.
Side marker lamps rear and
position/parking lamps when
the car is parked.
Main beam flash can be used.
03 Instruments and controls
Posi- Specification
tion
Daytime running lights, side
marker lamps rear and position/
A when
parking lamps in daylight when
the car's electrical system is in
key position II or the engine is
running.
Dipped beam, side marker
lamps rear and position/parking
lamps in weak daylight or dark-
ness or when the rear fog lamp
is activated. On cars with active
Xenon headlamps* (p. 89) the
daytime running light lamps are
switched on with reduced
brightness.
The tunnel detection (p. 86)*
function is activated.
The active high beam (p. 87)*
function can be used.
Main beam can be activated
when dipped beam is switched
on.
Main beam flash can be used.
Dipped beam, side marker
lamps rear and position/parking
lamps.
*
Option/accessory, for more information, see Introduction.
03
}}
83