Trip computer - trip statistics*
Information is stored about completed trips
containing average fuel consumption and
average speed, which can be viewed in the
centre console's screen as a bar chart.
Function
Trip statistics
31
.
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
The TUNE knob can be used to change the
scale for each bar between 1 km and 10 km -
the cursor at the far right changes position
between up and down depending on the
scale selected.
The figure is schematic - layout may vary depending on updated software and market.
31
Operation
Different settings can be made in the menu
system MY CAR, see MY CAR (p. 108) -
Trip statistics
there, find
.
With the "
Reset when vehicle has been off
for minimum 4h
" option highlighted, all sta-
tistics are deleted automatically once driving
is complete and the car has been stopped for
4 hours. The journey statistics start again
from zero the next time the engine is started.
•
Reset when vehicle has been off for
minimum 4h
- highlight the box by
selecting ENTER and go back out of the
menu by selecting EXIT.
If a new drive cycle begins before 4 hours
have passed, the current period has to be
deleted manually first using the "
trip
" option.
•
Start new trip
- ENTER is used to delete
all previous statistics, back out of the
menu by selecting EXIT.
See also information on Eco guide (p. 65).
Related information
•
Trip computer (p. 109)
•
Trip computer - analogue combined
instrument panel (p. 110)
•
Trip computer - digital combined instru-
ment panel (p. 114)
03 Instruments and controls
•
Trip computer - supplementary informa-
tion (p. 118)
Start new
*
Option/accessory, for more information, see Introduction.
03
119