Security > Smart Binding > Smart Binding; Security > Smart Binding > White List; Security > Smart Binding > Black List - D-Link DGS-1210-28 Reference Manual

Web smart switch
Hide thumbs Also See for DGS-1210-28:
Table of Contents

Advertisement

4 Configuration
Security > Smart Binding > Smart Binding
The Smart Binding Settings page allows users to set IP-MAC-Port Binding entries by manually entering
required information, or by scanning all connected devices and clicking to bind.
The Manual Binding Settings contains the following fields:
IP Address: Specifies the IP address to bind to the MAC address set below.
MAC Address: Specifies the MAC address to bind to the IP address set above.
Port: Specify the switch ports for which to configure this IP-MAC binding entry (IP Address + MAC Address).
Click Add to add a new entry.
Auto Scan: The Auto Scan Setting can list connected devices and easily select to bind. It contains the
following fields:
IP Address From/To: Specifies the range of IP Address to find desired devices, or leaves the fields blank to
see all connected devices.
Click Scan and the search results will be listed in below table.
Binding: check the box to select desired binding devices.
Apply: click Apply to set IP-MAC-Port Binding entries."
Select All: to check the boxes of Binding for all found devices.
Clear All: to cancel the box of Binding
Security > Smart Binding > White List
When IP +ARP Inspection Mode is selected, the White List page displays finished IP-MAC-Port Binding
entries from page Smart Binding. Only IP packets or ARP packets carrying matched IP-MAC-Port
information can access to the switch. You can cancel a device's authorization by deleting it from the table.
Select the check box of entry then click Delete to remove it.
Click Select All to select all entries of the table or click Clean to select none entries. Please keep at least
one management host in the White List.
Security > Smart Binding > Black List
The Black List page shows unauthorized accesses. When ARP Inspection is selected and a device sends
out an ARP packet containing unmatched IP-MAC-Port information, the device will be forbidden and listed
here.
Figure 4.89 – Security > Smart Binding > Smart Binding
Figure 4.90 – Security > Smart Binding > White List
6
1
6
1
D-Link Web Smart Switch User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents