Configuration Backup And Restore; Firmware Backup And Upgrade - D-Link DGS-1210-28 Reference Manual

4 Configuration

Configuration Backup and Restore

Allow the current configuration settings to be saved to a file (not including the password), and if necessary,
you can restore configuration settings from this file. Two methods can be selected: HTTP or TFTP.
HTTP: Backup or restore the configuration file to or from your local drive.
Click Backup to save the current settings to your disk.
Click Browse to browse your inventories for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.
TFTP: TFTP (Trivial File Transfer Protocol) is a file transfer protocol that allows you to transfer files to a
remote TFTP server. Specify TFTP Server IP Address with IPv4 or IPv6 address and TFTP File Name for
the configuration file you want to save to / restore from.
Click Backup to save the current settings to the TFTP server.
Click Restore after selecting the backup settings file you want to restore.

Firmware Backup and Upgrade

Allow for the firmware to be saved, or for an existing firmware file to be uploaded to the Switch. Two methods
can be selected: HTTP or TFTP.
Figure 4.12 – Tool Menu > Reboot Device
Figure 4.13 – Tool Menu > Configure Backup and Restore
Note: Switch will reboot after restore, and
all current configurations will be lost
1 7
1 7
D-Link Web Smart Switch User Manual