Lengrad CM7100 User Manual page 7

The camera interface is defaulted to show the image on as many devices as possible (Mobile:
iOS, Android & Desktop: Windows & Mac) therefore what you see next depends on the device
you are viewing it on and the browser you use.
Click on the camera you wish to view and the default web browser will open.
Internet Explorer Browser
Internet Explorer does not natively support viewing
mjpeg files.
1. If using Internet Explorer change the address to
((Camera IP Address)/index.html)
2. Internet Explorer may ask for plug-in if ActiveX is not
installed, otherwise it will go to Home page and start to
show the video captured by the camera (by default the
camera is enabled for anonymous access) see Figure 1.
3. Click the "Configuration" icon (middle one at lower
left, looks like tools) and the browser will ask for
credentials to authorize configuration.
4. Enter the administrator user name and password to
access the Web Configuration Interface, the default
user name and password are both set to admin.
5. Proceed to the Basic Settings explanation section.
Chrome Browser
Chrome, Firefox, & Safari will give you an image similar to
above
1. Click the "CM7100 Setup" icon (lower left) and the browser will
ask for credentials to authorize configuration.
2. Enter the administrator user name and password to access the Web
Configuration Interface, the default user name and password are
both set to admin.
3. Proceed to the Basic Settings explanation section.
7
Page
301 Fulling Mill Road, Suite G ©Copyright 2014 by Legrand
Middletown, PA 17057 All Rights Reserved.
(800)-321-2343 www.legrand.us