Lengrad CM7100 User Manual page 27


Enable Motion Detection:

Show Motion Detection Regions:

Select a Region:

Sensitivity:
Alarm Action:

Record Video From.....

Voice Alarm to SIP Phone:

Upload to Alarm Center:

Upload to Alarm HTTP Server

Record Video and Upload...:

Email and FTP upload JPEG:
Motion Detection Time Schedule:
This page allows user to configure Motion Detection Operation Schedule:
Figure 16-2: Motion Detection Schedule Configuration Page

As shown in Figure 16-2, user can configure the Motion Detection Region with related
Start and Stop time to control the motion detection operation.
When checked, motion detection enabled.
When checked, motion detection region with
number will be displayed as a white rectangle in the
screen. When "Edit" clicked, the rectangle will
become Red.
Pull down to select and configure alarm region,
16 alarm regions available, from 0 to 15.
Select configured alarm region number, input a
number for sensitivity to trigger the alarm, 100 is
the maximum sensitivity value.
Allows user to configure how long pre/post alarm
trigger moment, the video will be captured.
When checked and SIP proxy configured and
IPCam registered, SIP alarm call will be made to
pre-configured number.
When checked, the alarm video will be transferred
to Alarm Center.
When checked, alarm sent to Alarm HTTP Server.
Third Party Server can be used via GS HTTP API
When checked and FTP server configured, the
recorded video sent to the configured FTP server.
When checked, snapshots of trigger moment will be
emailed to pre-configured email account and also
uploaded to FTP server if configured.
27
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800)-321-2343
©Copyright 2014 by Legrand
All Rights Reserved.
www.legrand.us