Equipment Package Contents; Installing The Cm7100 - Lengrad CM7100 User Manual

Equipment Package Contents

The CM7100 package contains:

CM7100 IP Camera

Camera Stand

12V DC Universal Power Adaptor

Ethernet Cable

Wall Plate

Installation Sheet

Installing the CM7100

Wall Mount (direct network connection with PoE)
Run Cat 5 cable from enclosure mounted device supplying power over Ethernet (PoE) to a single gang
box at the intended camera location. The Legrand DA2400 and DA1458 are suitable PoE products.
Feed terminated Cat 5 cable through notch at bottom of supplied Wall Plate, leaving about six inches of
cable outside the box and mount Wallplate to single gang box using supplied rubber gasket.
Attach Camera to Stand and Stand to Wallplate using provided screws and position camera for use. Plug
in Cat 5 Ethernet cable with PoE to back of Camera.
Cat 5 cable
notch
Cat 5 cable
connector
4
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800)-321-2343
©Copyright 2014 by Legrand
All Rights Reserved.
www.legrand.us