Lengrad CM7100 User Manual page 18


Registered:

Unregister on Reboot:

Account Name:

SIP Server:

Outbound Proxy:

SIP User ID:

Authenticate ID:

Authenticate Password:

STUN Server:

Stream:

Preferred Vocoder:

Registration Expiration:

Local SIP Port:

Local RTP Port:

Auto On-hook Timer:

Disable Audio in SIP Call:

Enable Keep Alive:

Accept Direct IP Call:

Enable White List Number Filter:

Enable two-way Audio Warning:

SIP Proxy Compatibility Mode:

Self-define Warning Audio:

Phone List/Phone Number:

White List/Phone Number:
SIP registration status.
Display "Online" in Green, "Offline" in
If checked, camera reboot will unbind all
registration in same SIP account.
SIP account name
FQDN or IP of SIP server from VoIP ISP
IP or FQDN of Outbound proxy server, helps
penetrate NAT/Firewall
SIP username, or telephone number from ITSP
Authenticate ID used by SIP proxy
Authenticate password used by SIP proxy
STUN server used to resolve NAT.
Which stream used for SIP call.
Audio codec used for SIP call.
Registration expiration time, default 3600 seconds
Local SIP port, default 5060
Local RTP port for media, default 5004
Auto On Hook timer, default 300 seconds
Checked to disable audio for SIP call.
Checked to enable, help NAT resolution
Check to accept peer-to-peer IP call.
Check to allow only white list number to call in
Check to enable two-way audio warning.
Check to enable more proxy compatibility with cost
of bandwidth
Upload self-defined warning message audio
(follow the format )
Caller or call receiver number when alarm
call triggered.
Phone numbers allowed to call into the camera.
18
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800)-321-2343
Red.
©Copyright 2014 by Legrand
All Rights Reserved.
www.legrand.us