Maintenance Page - Lengrad CM7100 User Manual

Maintenance Page


Restart:

Restore:

Upgrade via:

Firmware Server Path:

Config Server Path:

XML ConfigFile Password:

Automatic Upgrade Interval (Min.):

Automatic Upgrade:
Figure 11: Maintenance Page
When clicked, the camera will reboot or restart
When clicked, will reset to factory default, wiping
out all configurations (except IP address)
Upgrade firmware via TFTP, HTTP or HTTPS
Server path holding the firmware
Server path holding the configuration file (auto
provisioning)
Password to encrypt XML based configuration file
Time interval for automatic upgrade, default 10080
Check to enable automatic firmware upgrade and
Provisioning (XML based only).
21
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800)-321-2343
©Copyright 2014 by Legrand
All Rights Reserved.
www.legrand.us