Smtp Settings Page (Email Alarm ) - Lengrad CM7100 User Manual

SMTP Setting Page (Email Alarm)

Enable SMTP:

SMTP Server:

SMTP Server Port:

From Email address:

To E-Mail address:

User Name:

Password:

SSL:

Email Subject:

Email Content:
NOTE:
 Click "Save" to save the email configuration information.
Click "Test" after configuration, if setting is correct, a test email will send out and "Test

successful!" yellow bar will display
Figure 12: SMTP Setting Page
When checked, email client is enabled.
SMTP Email Server IP or Domain Name
Port number used by server to send email
The email address alarm is sending from, usually client email ID
The email address to receive the alarmed email, total 3 included.
Email client User ID
Email client password
Check if the SMTP email server requires SSL
Customizable email subject for user convenience
Customizable email body for user convenience
22
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800)-321-2343
©Copyright 2014 by Legrand
All Rights Reserved.
www.legrand.us