Minimum Recommended Computer System Requirement; Connect The Camera To Network With Dhcp Server (Recommended) - Lengrad CM7100 User Manual

Indoor camera
Table of Contents

Advertisement

M
INIMUM RECOMMENDED COMPUTER SYSTEM REQUIREMENT
To configure the CM7100, you must have a computer, PC recommended. The minimum
recommended PC system requirement listed below:
Windows 2000, XP, Windows Vista, Windows 7 (32bit or 64bit)
CPU: Intel Pentium 4 or higher, 2 GHz
RAM: 1 GB (4 GB recommended for larger systems)
Support for DirectX 8.0 and above.

Connect the Camera to network with DHCP server (Recommended)

The CM7100 by default is enabled as a DHCP client, it will automatically get an IP address from
the network (router) with DHCP server running.
PC: The Camera supports UPnP and the camera
can be found in the Network and Sharing Center
Alternately, the user can find the IP address assigned to the camera from the router's DHCP
server log or client list or by using an IP sniffer.
Mac: The Camera supports Bonjour and the camera can be
found in the Bonjour list in Safari
If you do not see Bonjour in your Safari folder list.
Select Safari:Preferences:Advanced
1.
Check both boxes next to Bonjour setting
2.
6
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
All Rights Reserved.
(800)-321-2343
www.legrand.us
©Copyright 2014 by Legrand

Advertisement

Table of Contents
loading

Related Products for Lengrad CM7100

Table of Contents