Specifications; Standard Accessories; Optional Accessories ( Sold Separately) - Hitachi CM 4SB2 Handling Instructions Manual

4
PRECAUTIONS ON USING CUTTER
1. Do NOT use any cutting tool other than a dia-
mond wheel.
Use the diamond wheel specified in this manual.
2. Don't use it for cutting of metallic materials.
Diamond wheel may be broken or its service life
may be remarkably reduced when it is used for
cutting of metallic materials. Be sure not to use
the wheel for cutting of metals.
3. Do not start the cutter while the diamond wheel
is in contact with the material.
4. Keep the motor interior free of water.
5. Wear protective glasses to protect your eyes
while cutting.
6. Prior to use, be sure to check the diamond wheel
in such details as crack, broken part, bent part,
and the like. Don't use a diamond wheel if any of
the above detect is found on the wheel. Also
confirm that no abnormality exists by actual test
running.

SPECIFICATIONS

Voltage (by areas)*
Power Input
No-Load Speed
Max. cutting depth
Diamond wheel
Weight (without cord)
*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Box Wrench ................................................................ 1
(2) Wrench ........................................................................ 1
Standard accessories are subject to change without
notice.
110mm external dia. 1.0mm thickness 20mm internal dia.
1
2
7. Proceed with cutting operation when full speed
has been reached.
8. Do NOT apply excessive force.
9. When cutting concrete, tile, or stone, the maxi-
mum cutting depth should be held to within
20mm.
10. Never touch diamond wheel while operating.
11. Never lay down the cutter while the diamond
wheel is revolving.
Also do not stop the cutter with the diamond
wheel forcibly depressed against the material.
12. Exercise care to position the cutter at a safe,
stable spot when cutting.
13. Take good care of the power tool and keep it
clean.
(220V, 230V)
1320 W
11500/min.
34mm (wheel dia. 110mm)
31.5mm (wheel dia. 105mm)
2.8kg

OPTIONAL ACCESSORIES ( sold separately)

Diamond Wheel
Diameter
(mm)
Blade
A (Dry) 106
type
Optional accessories are subject to change without notice.
A Type
Hole
Thickness
diameter
(mm)
(mm)
20 1.2