Advertisement
6. EXERCISE MONITOR OPERATION
FUNCTION BUTTONS
MODE
1) Selects TIME, SPEED, DISTANCE, CAL, ODO and PULSE to preset.
2) Selects function display value on LCD, or enter after setting.
3) Hold for 2 seconds to reset all values excluding odometer to zero.
(When the user replace batteries, all the values will reset to zero automatically.)
SET
1) Set the target value of TIME, DISTANCE, CAL and PULSE.
2) Press and hold to speed up the increment.
RESET
1) Press the button to reset function value when setting.
2) Press the button and hold for 2 seconds to reset all values excluding odometer to zero.
(When batteries are replaced, all the values will reset to zero automatically.)
FUNCTIONS & OPERATIONS
1. Auto Scan
After the monitor is powered on, the LCD will cycle through all functions values from Time-Speed-
Distance-Calories-Odometer-Pulse respectively. Each value will be held for 6 seconds.
2. Time
Accumulates total time from 00:00 up to 99:59.The user may preset a target time by pressing the SET
& MODE button. Each increment is 1 minute.
If a TIME target value is set, this window will count down from the target value during exercise.
3. Speed
Displays the current training speed from 0.0 to 999.9 km/h
13
X-17
Advertisement
