Network Settings - D-Link DIR-840 User Manual

Section 3 - Setup
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router IP Address: Enter the IP address of the router. The default IP address is
192.168.0.1.
Subnet Mask:
Enter the Subnet Mask. The default is 255.255.255.0.
Device Name: Choose a name for the router.
Enable DHCP Check this box to enable the DHCP server on your router.
Server: Uncheck to disable this function.
DHCP IP Address
Enter the starting and ending IP addresses for the DHCP
Range:
server's IP assignment.
DHCP Lease Time:
The length of time for the IP address lease. Enter the Lease
time in minutes.
Primary WINS IP
Enter your primary WINS Server IP address.
Address:
Secondary WINS IP
Enter your secondary WINS Server IP address.
Address:
Enable DHCP
Check this box to add a DHCP reservations list.
Reservations:
Computer Name:
Give an identity to the computer.
IP Address:
Enter the computer's IP address.
MAC Address:
Enter the MAC address or Clone your PC's address.
D-Link DIR-840 User Manual

Network Settings

38