Time - D-Link DIR-840 User Manual

Section 5 - Maintenance
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to
automatically adjust the time when needed.
Current Router Displays the current date and time of the router.

Time:

Time Zone:
Select your Time Zone from the drop-down menu.
Enable Daylight To select Daylight Saving time manually, select enabled or
Saving: disabled, and enter a start date and an end date for daylight
saving time.
Daylight Saving If Daylight Saving is enabled, you may specify the date it
Dates:
begins and ends.
Enable NTP Server: NTP is short for Network Time Protocol. A NTP server will
synch the time and date with your router. This will only
connect to a server on the Internet, not a local server. Check
the box to enable this feature.
NTP Server Used:
Enter the IP address of a NTP server or select one from the
drop-down menu.
Date And Time: To manually input the time, enter the values in these fields
for the Year, Month, Day, Hour, Minute, and Second and then
click Set.Time.
You can also click Copy.Your. Computer's.Time.Settings
to synch the date and time with the computer you are
currently on.
D-Link DIR-840 User Manual
Time
76