Ipsec Settings - D-Link DIR-840 User Manual

Section 3 - Setup
The DIR-840 supports IPSec as the Server Endpoint. IPSec (Internet Protocol Security) protocols can provide IP security at the network layer.
Enabled: Check this box to enable IPSec.
Name: Enter a name for your VPN tunnel.
Local Subnet/ Enter the local (LAN) subnet and mask.
Netmask:
(ex. 192.168.0.0/24)
Remote IP:
Select if you will be connecting as a remote user or on a site
to site basis.
Remote Subnet/ Enter the remote subnet and mask.
Netmask:
Authentication
Enter the key for authentication.
Pre-Shared Key:
Authentication If you choose to enable XAUTH you need to choose between
XAUTH:
Server mode with an Authetification database, or Client
mode with a user name and password.
Local ID: Enter the local identification for how you appear on the
network VPN when connected locally.
Remote ID:
Enter the local identification for how you appear on the
network VPN when connected remotely.
D-Link DIR-840 User Manual

IPSec Settings

45