Autoconfiguration - D-Link DIR-840 User Manual

Section 3 - Setup
My IPv6 Connection: Select Autoconfiguration.(Stateless/DHCPv6) from
the drop-down menu.
IPv6 DNS Settings: Select either Obtain.DNS.server.address.
automatically or Use.the.following.DNS.Address.
Primary/Secondary DNS Enter the primary and secondary DNS server
Address:
addresses.
Enable DHCP-PD
Check to enable DHCP-PD.
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the router's LAN Link-Local Address.
Enable
Check to enable the Autoconfiguration feature.

Autoconfiguration:

Select Stateful or Stateless autoconfiguration.
Autoconfiguration Type:
Router Advertisement Enter the IPv6 address lifetime (in seconds).
Lifetime:
DS-Lite: For this section, if your ISP provided you with DS-Lite
information, enter it here.
D-Link DIR-840 User Manual
Autoconfiguration
51