Ipv6 Over Ipv4 Tunneling - D-Link DIR-840 User Manual

Section 3 - Setup
My IPv6 Connection: Select IPv6. over. IPv4.Tunnel from the drop-down
menu.
IPv6 in IPv4 Tunnel Enter the settings supplied by your Internet provider
Settings: (ISP).
IPv6 DNS Settings: Select either Obtain.DNS.server.address.automatically
or Use.the.following.DNS.Address.
Primary/Secondary Enter the primary and secondary DNS server addresses.
DNS Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Address:
Displays the router's LAN Link-Local Address.
LAN Link-Local
Address:
Check to enable the Autoconfiguration feature.
Enable
Autoconfiguration:
Autoconfiguration
Select Stateful or Stateless autoconfiguration.
Type:
D-Link DIR-840 User Manual

IPv6 over IPv4 Tunneling

53