Iii) Ip Filter - Eci Telecom ONT B-FOCuS O-4F2PW Hardware Installation Manual

iii) IP Filter

In IP Filter page, one can add IP filtering rules.
Below is the description for the parameters:
Parameter
Enable IP Filter
Mode
Source Start IP Address
Source End IP Address
Destination Start IP Address
Destination End IP Address
Protocol
Add Button
After the configurations are done, click "Save" button to save it.
02-Oct-2011
Rev 0.1
B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual
Description
Select or unselect this check box, to enable or
disable IP filtering function.
Include two mode: Drop or Accept. Drop means
blocking the IP flows that meet the rule. Accept
means allowing the IP flows that meet the rule
Setup source start IP address
Setup source end IP address
Setup destination start IP address
Setup destination end IP address
Select Protocol. There are following options:
1) ALL, all protocols
2) TCP
3) UDP
4) TCP/UDP
5) ICMP
Click this button, to add a new filtering rule for
above configurations.
ECI Telecom Ltd. Proprietary 26