Eci Telecom ONT B-FOCuS O-4F2PW Hardware Installation Manual page 25

Channel
WiFi MAC Filter
SSID Select
SSID Name
Enable SSID
SSID Broadcast
SSID Isolate
Enable WPS
WPS Mode
PIN Code Number
WPS Connect Button
Encryption Mode
02-Oct-2011
Rev 0.1
B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual
9) B mode
10) G mode
By default the channel is auto selected
Enable or Disable WiFi MAC Filtering
Select the SSID to be configured
Configure SSID name. ChinaNet is the fix
prefix, and not configurable. The others are
configurable.
Enable or Disable this SSID
Enable or Disable Broadcast. Disable SSID
broadcast will cause the terminal can not use
passive scan to get the SSID.
Enable or Disable SSID Isolate. Enable Isolate
will cause the PC connecting to his AP can not
be ping.
Enable
Disable this function will cause PC and AP can
not match codes.
Include two modes: PBC and PIN. PBC is as
know as one key encryption mode. There is no
need to input the PIN code. In the PIN mode, it's
needed to input the PIN code. The two modes
needs supports from wireless applications on
user's wireless adapters.
When PIN mode is selected as WPS mode, it's
needed to input to here the PIN code generated
by user's wireless card application.
Click to enable WPS interaction. This can also
be done by the WPS button on ONU hardware
Includes:
1） Open: No encryption, no need to input key.
2） WEP: Including 2 modes: open system,
shared key modes. When the key is 64bits, it's
needed to input 5 ASCII characters or 10 Hex
characters. When the key is 128 bits, It's needed
to input 13 ASCII characters, or 26 Hex
characters.
3） WPA/WPA2 Personal: It's needed to input
WPA encryption mode, WPA version and WPA
key.
4） WPA/WPA2 Enterprise: It's needed to input
Radius server address, port number and WPA
key number.
Note: When WPS is enable, encryption mode
must be WPA/WPA2 Personal.
ECI Telecom Ltd. Proprietary
wireless protected setup function.
20