Iv) Routing - Eci Telecom ONT B-FOCuS O-4F2PW Hardware Installation Manual

iv) Routing

Routing configuration is used to configure the static routing parameters.
Below is the description for the parameters:
Parameter
IP Protocol Version
Destination IP Address
Destination Netmask
Gateway Address
IPv4 Interface
Add Button
After the configurations are done, click "Save" button to save it. Restart the device to make the modification to take
effects
02-Oct-2011
Rev 0.1
B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual
Description
Select the IP Protocol Version
Input the destination IP address
Input the destination Subnet Mask
Input the outgoing gateway address
Select the WAN ports that this route uses
Click this button, to add a new static routing
rule for above parameters.
ECI Telecom Ltd. Proprietary 21