Gigaset SL910A Setup & User Manual page 86

Gigaset SL910A only:
No time is specified for a message in the call list.
¥ £
Date/time are not set.
Set the date/time (
The answering machine reports "Invalid PIN" during remote operation.
¥
1. You have entered the wrong system PIN.
Enter the system PIN again.
¥
2. The system PIN is still set to 0000.
Set the system PIN to something other than 0000
The answering machine is not recording any messages/has switched to the advisory message.
¥
The memory is full.
¥
Delete old messages.
Play back new messages and delete.
Check base/handset service information
You will need the service information if you call our hotline.
Base service information:
Prerequisite: You are trying to establish an external call or are conducting an external call.
¤
Briefly touch any point in the status bar to show the required service information in the dis-
play.
Handset service information:
Prerequisite: A call is not in progress.
¤
Briefly touch any point in the status bar and then touch Show Service Info.
Authorisation
This device is intended for analogue phone lines in the UK and on the Irish network.
Country-specific requirements have been taken into consideration.
We, Gigaset Communications GmbH, declare that this device meets the essential requirements
and other relevant regulations laid down in Directive 1999/5/EC.
A copy of the Declaration of Conformity is available at this Internet address:
www.gigaset.com/docs
page 9).
Service (Customer Care)
£
( page 41).
83