Gigaset SL910A Setup & User Manual page 67

Baby phone call
If you accept an incoming call, the baby phone call mode is suspended for the duration of the
call, but the function remains activated.
The baby phone call is not deactivated by switching the handset off and on again.
Caution
u
Always check the function when switching on (noise sensitivity, connection to an
external number). Please note that the baby phone call is only activated 20 seconds
after being switched on.
u
Place the handset in the charger cradle so that the front with the microphone is facing
the baby and the distance between the handset and the baby is no more than 1 to
2 metres.
u
No answering machine may be activated at the destination number.
Changing the settings
¤ ¤
Menu key v
[ Ç Room Monitor]
¤
[ N Edit]
Select the sensitivity (High or Low) and
destination of the babyphone call (Internal or
External).
¤
Next to Number touch
number or select the internal participant.
¤ ¤
Confirm with è
Activating/deactivating the baby phone
call
¤
Switch on: Menu key v
¤
Monitor] Touch the key on the right.
¤
Switch off: On the handset on which the baby
phone call is activated, touch the key on the left.
Cancelling the baby phone call
¤
During a baby phone call, touch a.
Accepting the baby phone call
¤
On the destination phone/handset of the alarm call, press the pick-up key c or pick up the
receiver.
Deactivating the baby phone call remotely
Prerequisites: The destination of the baby phone call is an external number. The recipient's
phone supports tone dialling (MFV).
¤
Accept the baby phone call and touch the 9 ; keys.
The call is ended. The baby phone call is deactivated and the handset is in idle mode.
64
¤
¤
'
Enter the destination
Touch [ è Save].
¤
[ Ç Room
L
Touch
Sensitivity
Low
Forward alarm to
Internal
Number
(Not configured)
Room Monitor
Off
k
k
High
External
è
Save
M