System-Wide Speaker Call - Siemens OpenStage 30 T User Manual

Enhanced phone functions
Step by Step
j
Enter code!
n
60

System-wide speaker call

You can place a speaker call from your phone to any in-
ternal party with a telephone equipped with speaker-
phone mode or a loudspeaker.
Speaker call to a variable destination
The destination party is contacted via their internal
phone number.
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
Enter the system code for "Speaker call-one-way" (con-
tact the relevant service personnel if necessary).
or
S
Press the programmed "Spkr. 1-way" key.
j
Enter the internal number of the party.
A connection is immediately established to this destina-
tion station's loudspeaker if
• the station is not busy
• the handset has not been lifted
• "Speaker call protect" is not activated
Z
The caller hears a confirmation tone when the connec-
tion is established and they are free to start speaking.
^
The called party can accept the connection by lifting the
handset.
S
or
If the called party presses the speaker key or the line
key (if configured), the connection is lost.
The same number of speaker calls and normal
connections is possible.
Speaker call to a fixed destination
The system code for "Speaker call-one-way" and the
destination number are programmed on a repdial key
page 72.
S
Press the programmed repdial key. A connection to the
destination loudspeaker is immediately established.