Installation - Cisco SPA 525G Quick Start Manual

1 Installation

Caution
Do not insert a telephone line cord into
the port marked "AUX" (1).
STEP 1
Turn the phone over to expose the ports on the
back of the unit (Fig. 2).
STEP 2
Insert one end of the phone cord into slot marked
with a phone symbol (5). Insert the other end into
the jack at the bottom of the handset (not shown).
STEP 3
(Optional) Connect the desk stand by lining up
the tabs on the desk stand with the slots on the
back of the phone. Slide the bottom tabs into the
slots and lightly press down on the top of the desk
stand. It should easily slide into the top slots. Do
not force.
STEP 4
If you are using an external power source, plug
one end of the power cord into the building's
power source and insert the other end of the
power cord into the phone base (2).
Cisco SPA 525G Quick Start guide
Connecting your business to the things that matter
www.kcbusiness.co.uk
Fig. 2
Business
3