Horizontal alignment
• After choosing each pattern number, click Next.
• If no patterns are aligned in one or more of the sets, choose the closest one in each set and click
Realignment. Then print another alignment sheet and check it.
Note: Click Skip (where available) if you want to skip a particular alignment sheet.
6. When you are done, click Finish.
Parent topic:
Related topics
Loading Paper
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. If
paper does not feed correctly from the rear paper feed slot, you can use a cleaning sheet to clean the
rollers.
1. Do one of the following:
• If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in
this size: A3 (11.7 × 16.5 inches [297 × 420 mm]).
• If paper does not feed correctly from the rear paper feed slot, load the cleaning sheet that comes
with genuine Epson paper in the rear paper feed slot.
2. Press the
3. Select Setup.
4. Select Maintenance.
Print Head Alignment
home button, if necessary.
341