Cleaning The Paper Guide - Epson ET-16650 User Manual

After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another
Power Cleaning.
1. Turn off the product.
2. Visually check the ink levels and make sure each ink tank is at least one-third full.
Caution: If you run a Power Cleaning when the ink levels are low, you may damage the product.
3. Press and hold the
screen appears on the LCD screen.
4. Follow the on-screen instructions to run the Power Cleaning.
5. When the Power Cleaning is finished, run a nozzle check.
If the print quality did not improve, turn off the printer and wait at least 12 hours before running
another Power Cleaning.
If the print quality does not improve after running the Power Cleaning utility multiple times, contact
Epson for support.
Parent topic:
Related tasks
Refilling the Ink Tanks
Related topics
Loading Paper

Cleaning the Paper Guide

If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink.
1. If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in
one of these sizes: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches
[210 × 297 mm]).
2. Press the
3. Select Settings > Maintenance > Paper Guide Cleaning.
4. Select the paper source you want to clean.
5. Follow the on-screen instructions to clean the paper guide.
6. Repeat these steps as necessary until the paper comes out clean.
power button and the
Power Cleaning
home button, if necessary.
help button at the same time until the Power Cleaning
269