Output Settings - Fax - Epson WF-8590 User Manual

Setting
Receive Mode
Distinctive Ring
Rings to Answer
Remote Receive
Parent topic:

Output Settings - Fax

Set the output options you want to use for incoming faxes.
Note: If you select Save to Inbox, faxes are saved in the product's memory. Delete faxes after viewing
or printing them to prevent the memory from filling up. Even if you select other options for saving faxes,
they may be saved temporarily in the product's memory.
Options
Manual
Auto
All
Single
Double
Triple
Double&Triple
1 to 9
Off
On
Start Code
Selecting Advanced Fax Settings
Description
Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the product
Automatically receives and prints faxes.
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
product can receive faxes on the correct number of
rings. Select All for phones lines that do not use this
service.
Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to answer a call.
Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you select On, you must also
set a Start Code. If you are using a cordless handset
with its base connected to the product, you can start
receiving the fax by entering the code using the
handset.
263