Preparation After Storage - Arctic Cat ZR 900 Series 2006 Operator's Manual

12. Lubricate the rear suspension,
spindles, speedometer drive
adapter, and driven shaft sup-
port bearing with a low-temper-
ature grease.
13. On liquid cooled models, check
the coolant level and all coolant
hoses and connections for dete-
rioration or cracks. Add prop-
erly mixed coolant as necessary.
14. On fan cooled models, clean the
engine cooling fins and vents.
84
15. On 2-stroke models, place the
rear of the snowmobile on a
shielded safety stand; then start
the engine. Allow the engine to
idle; then using a long stiff wire
with a hooked end, raise the oil-
injection pump control arm to
the wide-open position until the
engine starts to smoke heavily.
Release the control arm and
turn off the engine.
16. On electric start models, charge
the battery; then connect the
battery cables making sure to
connect the positive cable first.
Test the electric start system.

PREPARATION AFTER STORAGE