Infrared Receiver Oa - BMW HP2 Sport Rider's Manual

The lettering
4
Factory Res.
flashes; the delivered state is
52
restored.
Infrared receiver
Convenient lap timing
Operation of the instrument clus-
ter in the RACE mode can be
carried out conveniently with an
infrared signal. For this purpose,
the infrared receiver available
as an optional accessory must
be connected to the instrument
cluster. Operation with the SET
button is also possible with the
z
integrated sensor.
To avoid the premature detection
of a completed lap due to inter-
ference signals, a minimum lap
time can be specified. Signals
received before this time expires
are then ignored. The minimum
lap time does not apply to opera-
tion with the SET button.
Setting minimum lap time
Select SETUP mode.
This adjustment can on-
ly be carried out with the
motorcycle at a standstill.
OA
Press MENU button 2 once.
The cursor is located before
the field.
SELECT
Press SET button 1 repeat-
edly until
Lap Timeout
displayed.
is