Installing Battery - BMW HP2 Sport Rider's Manual

Take diagnosis plug 1 out of
holder.
Disconnect connector 2 and
take out of holder.
Remove screw 3 and take out
battery holder 4.
An incorrect disconnection
sequence increase the risk
of short-circuiting.
Always observe the proper
sequence.
Remove battery ground wire 5
first.
Then remove positive battery
cable 6.
Lift out battery upward.

Installing battery

Place battery in battery com-
partment with positive terminal
on left in driving direction.
An incorrect installation se-
quence increases the risk
of short-circuiting.
Always observe the proper se-
quence.
Never install the battery without
the protective cap.
First install positive battery ca-
ble 6.
Attach negative battery ca-
ble 5.
10
143
z