BMW HP2 Sport Rider's Manual page 42

If a lap number is already shown:
4
Resetting RACE Monitor
( 40)
40
Press SET button 1 at start of
race.
The measurement of the race
z
and lap times is started.
The laps driven are counted.
in the LAP Monitor:
the lap time is shown
from the second lap the fastest
lap time is shown
in the SPEED Monitor:
the highest and lowest speed
of the current lap are shown
Press SET button at end of
each lap.
The measurements for the next
lap are started.
Press and hold SET button.
The measurements are
stopped.
The lap number flashes.
Press SET button.
The measurements are contin-
ued.
Resetting RACE Monitor
Press and hold SET button 1.
If the RACE Monitor is
reset in the next step, all
save data are deleted and can no
longer be displayed in the INFO
mode.
The measurements are
stopped.
The lap number flashes.
Press and hold SET button 1
again.
The measured values are reset.
Setting display duration
of lap time in LAP Monitor
Select SETUP mode.
This adjustment can on-
ly be carried out with the
motorcycle at a standstill.