Operating Stopwatch - BMW HP2 Sport Rider's Manual

Hide thumbs Also See for HP2 Sport:
Table of Contents

Advertisement

distance can still be driven with
the remaining fuel. It is only
displayed after the fuel reserve
is reached. This distance is
calculated on the basis of fuel
level and average consumption.
When refueling after running on
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. Otherwise neither the
fill level nor the operating range
display can be updated.
The determined residual
range is an approximate
reading. BMW Motorrad there-
fore recommends that you do
not try to use the full remaining
range before refueling.

Operating stopwatch

Press MENU button 2 repeat-
edly until cursor is located be-
fore
field.
TIMING
Press SET button 1 with stop-
watch stopped.
Stopwatch runs starting from
indicated time in steps of one-
tenth of a second.
Stopwatch continues to run
even after a mode change or
after switching off ignition.
Press SET button with stop-
watch running.
Stopwatch shows the time
measured.
Press and hold SET button.
Stopwatch is reset.
4
35
z

Advertisement

Table of Contents
loading

Table of Contents