Care & Cleaning; Recipes - Wolfgang Puck BEBB0030 Use And Care Manual

Care & Cleaning
1
Unplug your blender and ensure that all parts have completely cooled.
2
Do not place your any parts of your blender or tamper in the dishwasher.
3
Remove jar from motor base by lifting straight up. Rinse with warm
water to remove any large food particles that may have accumulated in
the jar. Extreme caution should be used when cleaning your blender jar
as the blades are very sharp.
4
Your blender jar can be cleaned by adding a few drops of dishwashing
detergent into the blender jar and filling with 2 cups of warm water.
Place the cover with filler cap on the jar and press the SMOOTHIE icon
followed by the START/CANCEL icon. Rinse and repeat with clean tap
water as necessary.
5
Wash the filler cap and lid in warm soapy water and dry thoroughly.
6
Wash the tamper stem with a damp soapy cloth and rinse. Do not
immerse the top of the tamper in water or any other liquid, nor place
under running water. Dry thoroughly.
7
Wipe the cord and base clean with a damp cloth. Dry thoroughly.
Caution: Do not immerse the plug, cord, or blender motor base in water
or other liquid. Do not use abrasive cleansers on any part of the blender.
Dry the blender jar thoroughly after cleaning. Do not allow any
standing water in the blender jar, or on the bottom of the blade
assembly if storing the blender jar upside down. This may cause rusting
of the bearings and affect the performance of the blender.
Caution: Any other servicing should be performed by WP Appliances
Consumer Services. If additional service is required, please contact our
customer service hotline at (800) 275-8273.
12

Recipes

13