Patch Pre-Select Recall Function - Mooer GEM Box Owner's Manual

Patch Pre-Select function can let you select the patch first but not to
activate it, and then perform an additional step to activate the patch.
To use this function, conform to the following instructions:
1. Before power on, hold down the [PATCH +] footswitch, and then
power to the GEM Box,
for 3 seconds, it indicates setting up to Patch Pre-Select function
successfully.
BANK
#
2. In play mode, select the patch to use
next. The selected new bank and
patch's number flash on the display, but
the sound does not change yet.
3. Press both [PATCH -] and [PATCH +] footswitches together, the
selected patch will be activated, the sound changes, and the display will
stop flashing.
PLAY / STOP
PATCH
BYPASS / TUNER
HOLD FOR MUTE TUNING
4. To return the normal patch selecting method, turn the power off and
then on again. The Patch Pre-Select function will not preserve when
power on again.
Patch Pre-Select
Recall Function
will appear on the display and last flashing
PATCH
EDIT
MODULE BYPASS
PLAY / STOP
PATCH
BYPASS / TUNER
HOLD FOR MUTE TUNING
BANK PATCH
# EDIT
16
MODULE BYPASS
BANK PATCH
# EDIT
BANK
#
PATCH
EDIT