Adjusting The Patch Level - Mooer GEM Box Owner's Manual

Patch Editing
Change Setting
02
Press [VALUE] knob to change effect/parameter type ahead, hold
and rotate [VALUE] knob to change effect/parameter type ahead
(clockwise) or backwards (anticlockwise), rotate [VALUE] knob to
set a new value of the effect type or parameter. As long as the
selected item's value changes, a dot (.) will appear in the bottom
right of the display. This indicates that a setting has been changed
from the currently stored value.
NR/CAB
EQ
GAIN
DRIVE
COMP/WAH
PEDAL
PATCH LEVEL
RHYTHM
03
Bypass an Effect Module
When adjusting an effect in EDIT mode, press [MODULE
BYPASS] / [PATCH +] footswitch to bypass this effect module, the
indication
turned off. Pressing [MODULE BYPASS] / [PATCH +] switches
once more will return the setting to the previous condition.
BANK
04

Adjusting the Patch Level

Set the Module Selector to [PATCH LEVEL], rotate [VALUE] knob
to adjust the volume of a patch, LED display will show the current
level.
The range of patch level is
Note: If you return to [PLAY] module and select another patch, the
changes you have made in edit mode will be lost unless you store the
patch first.
MODULATION
RATE
DELAY
D.TIME
REVERB
DECAY
STORE
PLAY
will appears on the display and the module will be
PATCH
# EDIT
BANK PATCH
# EDIT
Dot indicates that setting
has been changed
PLAY / STOP
BYPASS / TUNER
HOLD FOR MUTE TUNING
~ .
14
VALUE
MODULE BYPASS
PATCH