Dear Sharp Customer - Sharp AQUOS LC-80LE642U Operation Manual

Sharp aquos lc-80le642u liquid crystal television
Hide thumbs Also See for AQUOS LC-80LE642U:
Table of Contents

Advertisement

DEAR SHARP CUSTOMER
Thank you for your purchase
of the Sharp Liquid Crystam Television.
To ensure
safety
and many
years of trouble-free
operation
of your product, please
read the important
Safety Instructions
carefully
before using this product.
iMPORTANT
SAFETY iNSTRUCTiONS
Electricity
is used to perform many useful functions,
but it can also cause personal injuries and
property
damage
if improperly
handled.
This product
has been engineered
and manufactured
with
the highest priority on safety. However, improper
use can result in electric shock and/or fire. In order
to prevent
potential
danger,
please
observe
the following
instructions
when
installing,
operating
and cleaning the product.
To ensure your safety and prolong the service life of your Liquid Crystal
Television,
please
read the following
precautions
carefully
before
using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus
near water.
6) Clean only with dry cloth.
7) Do not block any ventilation
openings.
Install in accordance
with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators,
heat registers,
stoves, or other apparatus
(including
amplifiers)
that produce
heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly
at plugs, convenience
receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories
specified
by the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified
by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus
combination
to avoid injury from tip-over.
13) Unplug this apparatus
during lightning storms or when unused for long periods of
time.
14) Refer all servicing
to qualified
service personnel.
Servicing is required when the apparatus
has
been damaged
in any way, such as power-supply
cord or plug is damaged,
liquid has been
spilled or objects have fallen into the apparatus,
the apparatus
has been exposed
to rain or
moisture,
does not operate
normally, or has been dropped.
Additional
Safety Information
15) Power Sources-This
product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your home, consult your
product dealer or local power company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
16) Overloading--Do
not overload wall outlets, extension
cords, or integral convenience
receptacles
as this can result in a risk of fire or electric shock.
17) Object and Liquid Entry--Never
push objects of any kind into this product through openings
as
they may touch dangerous
voltage points or short-out
parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
18) Damage Requiring
Service--Unplug
this product from the wall outlet and refer servicing
to
qualified service personnel
under the following
conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
J
_-2
iMPORTANT
SAFETY iNSTRUCTiONS
e) If the product has been dropped or damaged
in any way, and
f ) When the product exhibits a distinct
change in performance
- this indicates
a need for
service.
19) Replacement
Parts--When
replacement
parts are required,
be sure the service technician
has
used replacement
parts specified
by the manufacturer
or have the same characteristics
as the
original part. Unauthorized
substitutions
may result in fire, electric shock, or other hazards.
20) Safety Check--Upon
completion
of any service or repairs to this product,
ask the service
technician
to perform safety checks to determine
that the product is in proper operating
condition.
21) Wall or ceiling mounting--When
mounting
the product on a wall or ceiling, be sure to install the
product according
to the method recommended
by the manufacturer.
,,
J
®
'
'
EXANiPLE
OF ANTENNA
GROUNDING
AS PER
Outdoor Antenna Grounding ------ if an outside
NATIONAL ELECTRICAL
CODEANSI/NFPA 70
|
antenna is connected
to the television
z_
|
equipment,
be sure the antenna system
is
_ANTENNA
LEAD
|
grounded so as to provide some protection
I_
_
INWIRE
|
against voltage surges and built-up static
..-'_TJkl
|
charges.
_/
..........
//D$'X x-.
|
Article 810 of the National Electrical Code
j
_.n_2_u
_
I_
I'_
ANTENNA
....
'
DISCHARGE
UNIT
|
ANSI/NFPA70
prov,des,rlforrnat,onw,th
_
_'_'_///
"1_
"_(NEOSEOTION81020'
|
regard to proper grounding of the mast and
I
FI F(':TR_C,_'-_'_[
/ :t_[
'
'
'
|
supporting
structure, grounding
of the lead-
I
SERVICE
t
/
L
I GROUNDING
CONDUCTORS
|
in wire to an antenna discharge unit, size of
[ Eo_
_
/_-L
_ECSECTION m 0 m
|
grounding
conductors,
location of antenna-
_
__
|
discharge unit, connection to grounding
___
GROUND CLAMPS
|
electrodes,
and requirements for the
=.--
POWER SERVICE GROUNDING
|
grounding
electrode.
ELECTRODE
SYSTEM
"
"
(NEC ART 250)
NEC
NATIONAL
ELECTRICAL
CODE
,, Water and Moisture -- Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in awet
basement; or near a swimming
pool; and the like.
,, Stand -- Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or table recommended
by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer's
instructions. Use
only the mounting hardware recommended
by the manufacturer.
,, Selecting the location -- Select a place with no direct sunlight and good ventilation.
,, Ventilation - The vents and other openings in the cabinet are designed for ventilation.
Do not cover
or block these vents and openings since insufficient ventilation can cause overheating and/or shorten
the life of the product.
Do not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings. This product is not designed for built-in installation; do not place the
product in an enclosed place such as a bookcase
or rack, unless proper ventilation is provided or the
manufacturer's
instructions are followed.
,, The front panel used in this product is made of glass. Therefore, it can break when the product is
dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel
breaks.
,, Heal - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
,, The Liquid Crystal panel is a very high technology product with 2,073,600
pixels, giving you fine picture
details.Occasionally,
a Iew nonactive
pixels may appear on the screen as a fixed point of blue, green or
red. Please note that this does not affect the perfermanoe of your product.
,, Lightning -- For added protection
for this television equipment
during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the
antenna. This will prevent damage to the equipment due to lightning and power-line surges.
,, Power Lines -- An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
,, To prevent fire, never place any type of candle or flames on the top or near the TM set.
J

Advertisement

Table of Contents
loading

Table of Contents