Sharp AQUOS LC-80LE642U Operation Manual page 24

On-Screen DispJay Menu
Automatically adjusts tile brightness of the screen, For a better white balance, use color temperature Automatically adjusts the image contrast according
Adjusts the picture to your preference with the Off: The brightness is fixed at the value set in correction, to the scene,
following picture settings.
• For operating the on-screen display menu, see page 20.
Backlight The screen The screen
dims brightens
Contrast For less For more
contrast contrast
Brightness For less For more
brightness brightness
Color For less color For more color
intensky intensity
Tint Skin tones Skin tones
become become
reddish greenish
Sharpness For less For more
sharpness sharpness
* For resetting all Picture adjustment items to the factor,
preset values, press j,/Y to select "Reset", press
ENTER, press _/Y to select "Yes", and then press
ENTER.
The audio and video settings can be changed to suit
the program or input content being watched,
* The seJectable items vary depending on the input
source.
* You can select AV MODE by pressing AV MODE on
the remote control unit. See page 17 for details of AV
MODE settings.
"Backlight". High: Whke with bluish tone Advanced: Produces higher contrast image
On: Automatically adjusts. Mid-High: _ especially in dark scene.
On:Display: Displays the OPC effect on the screen Middle: $ Standard: Produces high contrast image.
while adjusting the brightness of the screen. Mid-Low: Off: No adjustment.
Low: Whke with reddish tone
White balance can be adjusted between a maximum of
* When set to "On", the Optical Picture Control (OPC) +30 and a minimum of -30 for each color temperature. Adjusts the differences of picture tones between
senses the surrounding light and automatically adjusts R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/Hi) bright pads and dark par_s. The adjustment range
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect ks abilky to sense [] Fine tuning the color temperature of the gamma can be set to a maxirnum of +2 and a
surrounding light. [o fine tune the color temperature, set "10 Point minimum of-2 by pressing _ or I_.
, When set to "On:Display", OPC effect displays on the Setting" to "On".
screen while the OPC adjusts the screen brightness. You can adjust the "Position" setting. Adjust the set ........................................................................................
color temperature frorn +1 to {-10. Adjusts on-screen black level to your preferred level.
White balance can be adjusted between a maximum High: The black level gets brighter.
of +30 and a minimum of----30 for each color Low: The black level gets darker.
temperature.
This lV provides various advanced functions for
optimizing the picture quality=
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Rue: This is a standard to adjust the color
either more reddish or more bluish in tone.
C.M.S.-Saturation: increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image
brighter.
A lower value makes the image darker.
• For resetting all adjustment items to the factory preset
values, press _,/Y to select "Reset", and then press
ENTER.
* When "PosRion" is set to "10", you can adjust the white
balance between -30 and 0.
* For resetting all adjustment kems to the factory preset
values, press A/Y to select "Reset", and then press
ENTER.
Use Motion Enhancement to view fast--action video
more clearly,
t20Hz High
t20Hz Low For obtaining a clearer image.
Off Original image.
* "Motion Enhancement" may cause image noise. If this
occurs, turn the function "Off".
* When AV MODE is set to "GAME" or "PC", or PC
format is being input, "Motion Enhancement" is net
available.
* "Black Level" is available for input signal from
Cemposke Video, Component 480i and analog
broadcasts (air and cable).
(D" 22